17 Aug ecocoat premier Simple Application with Staggering Results

While scrolling through social media, I came across a post which suggested an unorthodox approach to applying IGL Coatings Ecocoat Premier. The discussion was about solutions for removing wash marring and light defects within paintwork coatings; if it was possible or was the best approach to remove and reapply.


Full credit has to go to Danny Chong for explaining Ecocoat Premier spray sealant applied via machine on a finishing pad as an exceptional way to remove these types of defects. This stuck in my head due to the fact I've personally used a finishing polish with the softest pad possible. Like a Like Country CCS Gold previously with other branded coatings which obversely sacrificed the durability and hardness of the area, sometimes even removing the product and resulting in reapplication.


I was convinced of the application process. However, I wanted to try before buying fully into the technique. I just didn't have the opportunity with the vehicles that were in the diary. Danny then posted a live video whilst carrying out some training showing the process. Though unfortunately this didn't show the true result that I was later to witness in person due to streaming quality.

Opportunity came when my parents little VW Polo was covered in various contamination and was suffering from lower panel general wash marring.


This is wat I found to work

I chose Rupes dual action polishers to keep heat to a minimum for the process with soft open cell pads throughout using approximately four pads to complete the car.

Initially apply three to four spritz of ecocoat premier onto the pad, spread a small 12” x 12” area without the machine running and no pressure applied.

Start the machine on speed setting two and work a area of approximately 24” x 24” using the weight of the machine only until there is little to no residue left to remove.

Using this method although simple has staggering results on previously coated paintwork with no difficult streaks or smearing left to remove.





Review of Ecocoat Premier application using machine by Paul Naisbitt, Deluxe Detailing.



15 Aug  IGL Video Contest is Back! Are You Ready to Win $500?

The IGL Video contest is back and it’s bigger than ever! This time around, you stand to win USD500 worth of IGL Coatings products and get your video premiered at SEMA 2018. We’ll also dedicate a detailer highlight to your shop.


How to Join the IGL Video Contest

Step 1: Record your detailing video.

Step 2: Show off the IGL products you used.

Step 3: Give a review of IGL products.

Step 4: Upload your video (Youtube/Google Drive/Vimeo/Dailymotion etc.)

Step 5: Submit your link to marketing@iglcoatings.com.
Include your full name, business name, contact number & full mailing address.


What Should I Record & Submit?

If you’re looking for inspiration, you should watch what our accredited detailers submitted previously!



Easy to Use Video Editing Applications

Don’t know how to edit your videos? We’ve listed some down for you!


Don't forget to like and follow IGL Coatings on Facebook for more video hacks that you can use to participate in the contest.


Prizes You Can Win

1)  USD500 worth of IGL products

2) USD300 worth of IGL products

3) USD100 worth of IGL products

4) Honorary mention

5) Video premiere at SEMA 2018

6) Detailer highlights



All IGL Accredited Details around the world.


August 15th, 2018 until September 30th, 2018.

Terms & Conditions

  1. Open to all IGL Detailers only from around the world.
  2. All entries must be submitted as a link to the digital video.
  3. Multiple entries are allowed but only one video will be selected as the winner.
  4. Participants may submit their video entries as individuals or as a team.
  5. Videos that have been submitted for commercial use or have won contests before are not eligible for prizes.
  6. No other competing brands should be visible in the video. The video may be disqualified.
  7. No copyrighted materials (music, images, etc.) allowed unless proof of ownership or license is provided along with the submission.
  8. Entries may be submitted in any language but English subtitles or accompanying notes are preferable.
  9. The only compensation for submitting a video is the opportunity to be awarded a prize if the entry wins. IGL Coatings will pay filmmakers NO additional compensation nor be liable to the filmmaker under any circumstances. All submissions to IGL Coatings remain the property of individuals or organisations that created them. However, by registering and submitting the video, the participant agrees that IGL Coatings and the organisers reserve an irrevocable, non-exclusive, royalty free license to use, license, distribute, produce the content.
  10. Winning prizes are subject to organisers’ discretion.
  11. Judge decisions are final. IGL Coatings reserve the rights to amend T&C without prior notice.

10 Aug ISO 9001:2015 & What It Means for IGL Coatings and You

IGL Coatings had on July 2018 achieved yet another milestone by receiving accreditation by the United Kingdom Accreditation Service (UKAS) that its quality management systems (QMS) for the manufacture of functional coatings and chemicals has been assessed and registered against the provision of ISO 9001 : 2015. 


IGL Coatings developed and implemented our quality management system in order to improve the overall performance of the organisation, to consistently meet or exceed our customer’s expectations for product quality and performance, to enhance our customer service and after sales services to meet our customer’s requirements and continual improvement of our process and systems.


The decision to work towards ISO 9001 accreditation demonstrates IGL Coatings ongoing commitment to providing a high-quality and consistent products and services to our clients and our ongoing investment in technology, research and development.


To become ISO 9001:2015 compliant, IGL Coatings underwent an evaluation and audited process which included quality management system development, a management system documentation review, audit and initial assessment. This enabled us to review our processes to improve where necessary in order to provide our customers.


The ISO 9001:2015 certification is the assurance that all testing and calibration laboratories, certification and inspection bodies have been assessed against internationally recognised standards to demonstrate their competence, impartiality and performance capability and that IGL Coatings has robust, clearly defined procedures in place in all our business areas such as Research and Development (R&D), production, supply chain management, risk management, handling of documents and data and strong business continuity processes.


Additionally the ISO 9001:2015 accreditation by UKAS is recognised internationally thorough European and world multilateral recognition agreements, meaning that the accreditations by UKAS signify that standards have been met and are recognised internationally without the need for any additional testing.


In addition to the accreditation and certification received, in order to continuously improve, IGL Coatings is also excited to announce that we are also in the process of migrating to an integrated ERP service in order to give us valuable insights about the statistics of our coatings and cleaning products produced and processes carried out on a daily basis. This ensures easier traceability of our supply chain and also converts customer feedback into project tasks for our R&D team.


IGL Coatings is focused on providing quality products and perfection to its customers. We integrate the attitude of quality in our daily work and continuously challenge ourselves to improve the quality management system to provide products that meet or exceed the needs and expectations of our customers, always complying with the specifications and regulations.





The International Organization for Standardization (ISO) is an international agency composed of the national standards bodies of more than 160 countries. The United Kingdom Accreditation Service (UKAS) is the sole national accreditation body recognised by government to assess, against internationally agreed standards, organisations that provide certification, testing, inspection and calibration services. UKAS represents the United Kingdom on three European and international bodies – the European co-operation for Accreditation (EA), the International Laboratory Accreditation Cooperation (ILAC) and the International Accreditation Forum (IAF).

Accreditation by UKAS means that evaluators i.e. testing and calibration laboratories, certification and inspection bodies have been assessed against internationally recognised standards to demonstrate their competence, impartiality and performance capability.

The ISO 9001 is the only internationally recognised standard for QMS. The standard caters for manufacturing and service industries. Organizations all over the world use these international  standard to demonstrate the ability to consistently provide products and services that meet customer and regulatory requirements.


Organisations which are certified to this standard reflect evidence of a business operation which is supported by a fundamental and robust quality management system platform.


ISO 9001:2015 It is the only standard in the 9001 series to which organizations are audited and certified.



06 Aug We’ve Reached Another Milestone in 2018!

Beginning July 2018, IGL Coatings have been certified with ISO 9001:2015. As part of our commitment to serve you better, this certification is to ensure that our management system is up to par with the family growth.


About ISO 9001:2015

ISO 9001:2015 specifies requirements for a quality management system when an organization:

a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and

b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements.


About IGL Coatings

IGL Coatings is the leading manufacturer and formulator of low and zero VOC high solids ceramic coatings. Our product range includes multiple surface coatings, cleaning and maintenance for various surfaces including paint, glass, metals, plastic and fabrics.


We are the first in the industry to have our nano-technology audited and verified by Nanoverify (a collaboration between Nano Malaysia Bread and SIRIM QAS International), our products certified by TUV Rheinland and is compliant with the REACH guidelines of Europe and a proud finalist in the Global Cleantech Innovation Programme (GCIP) in 2016. And now, we’re ISO 9001:2015 certified!

Find out more about how IGL Coatings can protect & enhance your entire vessel at www.iglcoatings.eu today!

We’re also available via info@iglcoatings.eu and 

+31 412 486 093